Skip to content

GUIDE

GUIDE (GAIT Universal IDE) is a lightweight integrated development environment developed by the Beihang GAIT research group, specifically designed for NOI contestants, supporting three programming languages: C, C++, and Pascal.

Note

Starting from September 1, 2021, NOI Linux 2.0 no longer includes GUIDE.1

Installation

Windows

Refer to https://www.noi.cn/xw/2009-03-23/714714.shtml.

Linux

Refer to https://www.noi.cn/xw/2009-03-23/714714.shtml or follow the steps below for installation.

Required Dynamic Library Files and Package Names

Dynamic Library Arch Package Name Debian Package Name Fedora Package Name openSUSE x86 Package Name openSUSE x86_64 Package Name
libpng12.so.0 lib32-libpng12 libpng12 libpng12 libpng12-0 libpng12-0-32bit
libSM.so.6 lib32-libsm libsm6 libSM libSM6 libSM6-32bit
libICE.so.6 lib32-libice libice6 libICE libICE6 libICE6-32bit
libXi.so.6 lib32-libxi libxi6 libXi libXi6 libXi6-32bit
libXrender.so.1 lib32-libxrender libxrender1 libXrender libXrender1 libXrender1-32bit
libXrandr.so.2 lib32-libxrandr libxrandr libXrandr libXrandr2 libXrandr2-32bit
libfreetype.so.6 lib32-freetype2 libfreetype6 freetype libfreetype6 libfreetype6-32bit
libfontconfig.so.1 lib32-fontconfig libfontconfig1 fontconfig libfontconfig1 libfontconfig1-32bit
libXext.so.6 lib32-libxext libxext6 libXext libXext6 libXext6-32bit
libX11.so.6 lib32-libx11 libx11-6 libX11 libX11-6 libX11-6-32bit
libz.so.1 lib32-zlib zlib1g zlib libz1 libz1-32bit
libgthread-2.0.so.0 lib32-glib2 libglib2.0-0 glib2 libgthread-2_0-0 libgthread-2_0-0-32bit
libglib-2.0.so.0 lib32-glib2 libglib2.0-0 glib2 libglib2_0-0 libglib2_0-0-32bit
libstdc++.so.6 lib32-gcc-libs libstdc++6 libstdc++ libstdc++6 libstdc++6-32bit
libgcc_s.so.1 lib32-gcc-libs lib32gcc1 libgcc libgcc_s1 libgcc_s1
librt.so.1 lib32-glibc libc6 glibc glibc glibc-32bit
libpthread.so.0 lib32-glibc libc6 glibc glibc glibc-32bit
libdl.so.2 lib32-glibc libc6 glibc glibc glibc-32bit
libm.so.6 lib32-glibc libc6 glibc glibc glibc-32bit
libc.so.6 lib32-glibc libc6 glibc glibc glibc-32bit

Installation on Debian or Ubuntu

1
2
3
4
5
6
7
sudo apt install -y libpng12 libsm6 libice6 libxi6 libxrender1 libxrandr libfreetype6 libfontconfig1 libxext6 libx11-6 zlib1g libglib2.0-0 libglib2.0-0 libstdc++6 lib32gcc1 libc6
wget -c http://download.noi.cn/T/noi/GUIDE-1.0.2-ubuntu.tar
tar -xvf GUIDE-1.0.2-ubuntu.tar
cd GUIDE-1.0.2-ubuntu
echo "install:\n\tinstall -Dm755 -t /usr/bin GUIDE\n\tinstall -Dm644 -t /usr/share/ lang_en.qm\n\tmkdir -p /usr/share/apis/ && cp -r apis/* /usr/share/apis/\n\tmkdir -p /usr/share/doc/GUIDE/ && mkdir -p /usr/share/doc/GUIDE/html/ && cp -r doc/*  /usr/share/doc/GUIDE/html/" > Makefile
sudo apt install -y checkinstall
sudo checkinstall --pkgname "GUIDE" --pkgversion "1.0.2" -y

Installation on openSUSE

Install opi according to the instructions provided by openSUSE/opi.

Then: (32-bit users should remove -32bit themselves)

1
2
3
4
5
6
7
sudo opi checkinstall
sudo zypper install -n {libpng12-0,libSM6,libICE6,libXi6,libXrender1,libXrandr2,libfreetype6,libfontconfig1,libXext6,libX11-6,libz1,libgthread-2_0-0,libglib2_0-0,libstdc++6,libgcc_s1,glibc}-32bit
wget -c http://download.noi.cn/T/noi/GUIDE-1.0.2-ubuntu.tar
tar -xvf GUIDE-1.0.2-ubuntu.tar
cd GUIDE-1.0.2-ubuntu
echo "install:\n\tinstall -Dm755 -t /usr/bin GUIDE\n\tinstall -Dm644 -t /usr/share/ lang_en.qm\n\tmkdir -p /usr/share/apis/ && cp -r apis/* /usr/share/apis/\n\tmkdir -p /usr/share/doc/GUIDE/ && mkdir -p /usr/share/doc/GUIDE/html/ && cp -r doc/*  /usr/share/doc/GUIDE/html/" > Makefile
sudo checkinstall --pkgname "GUIDE" --pkgversion "1.0.2" -y -rpmi

Editing Files

Click the "New File" button on the toolbar at the top of the page (or use the Ctrl+N shortcut) to create a new file.

By default, GUIDE's code font is not monospaced, which looks very unappealing. Therefore, you need to change the font in the settings.

In Edit -> Options -> Syntax Highlighting Settings, click the "All Fonts" button to switch the editor font.

Note that for unsaved new files, the font remains the default. Therefore, it is recommended to save the file first (click the "Save" button on the toolbar or press Ctrl+S) before starting to edit.

Compiling and Running

After editing the source code, click the "Compile" button on the toolbar (or press the F7 shortcut) to compile.

Changing Compilation Options

GUIDE does not have a feature to set default compilation options. Users can only change the compilation options for a specific file.

Right-click the tab of the file for which you want to change the compilation options, select the Set Compilation Command option, and then you can change the compilation options for that file.

If the source code compiles successfully, click the "Run" button on the toolbar (or press Ctrl+F5) to run the program.

Debugging

GUIDE's built-in debugging functionality has many bugs (such as program crashes midway), so it is not recommended to use GUIDE's debugging features directly.

It is recommended to use gdb directly in the terminal for debugging.

  1. NOI Linux 2.0 Released, Officially Launches on September 1! ↩

本页面最近更新：，更新历史
发现错误？想一起完善？ 在 GitHub 上编辑此页！
本页面贡献者：OI-wiki
本页面的全部内容在 CC BY-SA 4.0 和 SATA 协议之条款下提供，附加条款亦可能应用